Pptp - D-Link DIR-835 User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
PPTP IP Address:
Enter the IP address (Static PPTP only).
PPTP Subnet
Enter the Primary and Secondary DNS Server
Mask:
Addresses (Static PPTP only).
PPTP Gateway:
Enter the Gateway IP Address provided by your ISP.
PPTP Server IP: Enter the Server IP provided by your ISP (optional).
Username: Enter your PPTP username.
Password: Enter your PPTP password and then retype the
password in the next box.
Reconnect
Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time:
Auto-reconnect.
DNS Servers:
The DNS server information will be supplied by your ISP (Internet Service Provider.)
D-Link DIR-835 User Manual
Internet Setup

PPTP

21