Incoming - D-Link DFL-300 - Security Appliance User Manual

Incoming

This chapter describes steps to create policies for packets and services from
the External (WAN) network to the Internal (LAN) network including Mapped
IP and Virtual Server.
Enter Incoming window:
Step 1: Click Incoming under the Policy menu to enter the Incoming
window. The Incoming table will display current defined policies
from the External (WAN) network to assigned Mapped IP or
Virtual Server.
Step 2: The fields of the Incoming window are:
Source: source networks which are specified in the External
section of the Address menu, or all the external network addresses.
Destination: destination networks, which are IP Mapping addresses
or Virtual server network addresses created in Virtual Server menu.
Service: services supported by Virtual Servers (or Mapped IP).
Action: control actions to permit or deny packets from external
networks to Virtual Server/Mapped IP travelling through the
FIREWALL VPN ROUTER.
- 97 -