Dmz To External & Dmz To Internal - D-Link DFL-300 - Security Appliance User Manual

DMZ To External & DMZ To Internal
This section describes steps to create policies for packets and services from
DMZ networks to External (WAN) networks.
procedures for DMZ networks to Internal (LAN) networks.
Entering the DMZ To External window:
Click DMZ To External under Policy menu and the DMZ To External table
appears displaying currently defined DMZ To External policies.
The fields in the DMZ To External window are:
Source: source network addresses which are specified in the DMZ
section of the Address window.
Destination: destination networks, which is the external network
address
Service: services supported by Servers of external networks.
Action: control actions, to permit or deny packets from the DMZ
network to external networks travelling through the FIREWALL VPN
- 109 -
Please follow the same