Outgoing - D-Link DFL-300 - Security Appliance User Manual

Outgoing

This section describes steps to create policies for packets and services from
the Internal (LAN) network to the External (WAN) network.
Entering the Outgoing window:
Click Policy on the left hand side menu bar, and then click Outgoing under it.
A window will appear with a table displaying currently defined Outgoing
policies.
The fields in the Outgoing window are:
Source: source network addresses that are specified in the Internal
section of Address menu, or all the Internal (LAN) network
addresses.
Destination: destination network addresses that are specified in the
External section of the Address menu, or all the External (WAN)
network addresses.
Service: specify services provided by external network servers.
Action: control actions to permit or
networks to external network travelling through the Firewall.
Option: specify the monitoring functions on packets from internal
networks to external networks travelling through the Firewall.
reject/deny
- 89 -
packets from internal