Dimension One Spas Venture Specifications page 2

Venture Specification
R10in
[R25.40cm]
Spa shell
R8 1/2in
[R21.59cm]
Skirt Corner
21in
[53.34cm]
Electrical inlet
TOP VIEW
FRONT VIEW
Note: Subject to change without notice.
1. Stereo optional.
2. Engineering specs may differ slightly from brochure.
3. For E-Z lifter installation allow 18" clearances on the backside of the spa.
4. Alternative cabinets may add significant weight. Ask your dealer for exact details.
Caution:
Due to manufacturing tolerances there could be some
minor differences between the actual spa and the drawing above.
If site planning is critical to such tolerances, be sure to measure your actual spa.
Doc-1207 Rev - B
Rev Date: 10/31/05
Venture
Architectural Specification
9 1/4in
[23.42cm]
9 1/4in
Top View of Spa
[23.42cm]
THIS 3 FOOT SQUARE AREA,
ON BOTTOM OF SPA, TO BE
SUPPORTED CONSISTENT WITH
THE EDGES OF SPA BASE.
5 5/8in
[14.43cm]
Hose Bib/
Water Drain
91 1/2in
[232.43cm]
Shell
Spa Lip
88 5/8in
[224.98cm]
Pedestal Base
Specification, Venture
Control Panel
Front of Spa
Control Panel
Front of Spa
90 1/2in
[229.86cm]
Skirt
Dimension One Spas
91 1/2in
[232.41cm]
Shell Caution
90 1/2in
[229.87cm]
Skirt
88 5/8in
[224.98cm]
Pedestal
32in
[81.27cm]
36in
[91.43cm]
3 1/2in
[8.89cm]
Page 2 of 4