Names And Functions Of Terminals - Eclipse AVN8826 Installation Manual

Names and functions of ter
Names and functions of ter
• • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of
the power cable is exceeded, fire and electric shocks may result.
• • The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If
they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal,
accidents may result.
• • If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire insulating
method around the connection to insulate it. If the connection is not insulated, fire or accidents may result.
1 MAIN UNIT
1P
GPS ANTENNA
14
INTERCONNECTING
2
CABLE
(Power and speaker
8
connector)
Tip*1
Tip*1
• • The positions of the B+ and ACC pins on the connector may
vary depending on the vehicle. In such cases, replace the end
of the connector. Ask your dealer for details on connector pin
positions.
• • Installation is not possible for vehicles without ACC.
Tip
• • Refer to page 5 for details on the wire colours and connection points for interconnecting cables
4 .
16P
20P
16P
A
1
2
minals
minals
INTERCONNECTING CABLE (E-lan etc)
4
8
7
13P
F
ANTENNA PLUG
E
4P
D
B
TO VEHICLE-SIDE
CONNECTOR
- 4 -
5 ANTENNA CABLE
C
3
4
5
INTERCONNECTING CABLE
3
(Speed pulse, parking, reverse,video, etc)
2 , and 3 and
6