Enabling Paging (Intercom) - Cisco SPA942 - - IP Phone Administration Manual

4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
62
Log in to the web administration interface.
Click Admin Login and advanced.
Click the User tab.
Under Supplementary Services, in the Log Missed Calls for EXT <number> field,
choose yes.
Click Submit All Changes.

Enabling Paging (Intercom)

The paging, or intercom feature, allows two types of paging:
Single Page
A user can directly contact another user by phone. If the person being paged has
configured their phone to automatically accept pages (see
to Automatically Accept Pages, page
connection between the two phones is automatically established when paging is
initiated.
Group Paging (Limited to specific models; see below)
Group Paging lets the user page all the client stations at once (SPA9X2/SPA525G),
or page groups of phones (SPA525G). If the client station is on an active call while
a group page starts, the incoming page is ignored.
When paging occurs, the speaker on the paged stations is automatically powered
on unless the handset or headset is being used.
Group page is one-way only. The paged client stations can only listen to the call
from the originator.
To enable paging:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Supplementary Services, under Paging Serv, choose yes.
Customizing Cisco SPA and Wireless IP Phones
63), the phone does not ring and a direct
Cisco SPA and Wireless IP Phone Administration Guide
Enabling Call Features
Configuring a Phone