Configuring Extensions - Cisco SPA942 - - IP Phone Administration Manual

3
STEP 5

Configuring Extensions

STEP 1
STEP 2
STEP 3
STEP 4
44
Parameters
Registering LED
Call Back Active LED
Click Submit All Changes.
For more information on LEDs, see the
page 187.
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Ext <number> tab for the extension you want to configure.
In the General section, make sure that Line Enable is set to yes.
You can configure many parameters differently for different extensions. These
parameters are grouped on the Ext <number> tab. These parameters are
explained in other sections of this document:
• NAT Settings—Chapter 5, "Configuring SIP, SPCP, and NAT."
• Network Settings—Chapter 5, "Configuring SIP, SPCP, and NAT."
• SIP Settings—Chapter 5, "Configuring SIP, SPCP, and NAT."
• Call Feature Settings—Chapter 4, "Customizing Cisco SPA and Wireless
IP Phones."
• Proxy and Registration—Chapter 5, "Configuring SIP, SPCP, and NAT."
• Subscriber Information—Chapter 5, "Configuring SIP, SPCP, and NAT."
Description
Appears when the corresponding extension tries to register
with the proxy server.
Defaults to blanks (c=r;p=s).
Indicates Call Back operation is currently active on this call.
Defaults to blank (c=r;p=s).
"Creating an LED Script" section on
Cisco SPA and Wireless IP Phone Administration Guide
Configuring Lines and Extensions
Configuring Extensions