Dell PowerConnect M6220 Configuration Manual page 62

Physical Port 1/g2
Physical Port 1/0/2
VLAN 10: 192.150.3.1
VLAN Router Port 3/1
Layer 2 Switch
Figure 4-1. VLAN Routing Example Network Diagram
Example 1: Create Two VLANs
The following code sequence shows an example of creating two VLANs with egress frame tagging
enabled.
console#configure
console(config)#vlan database
console(config-vlan)#vlan 10
console(config-vlan)#vlan 20
console(config-vlan)#exit
Example 2: Configure the VLAN Members
The following code sequence shows an example of adding ports to the VLANs and assigning the PVID
for each port. The PVID determines the VLAN ID assigned to untagged frames received on the ports.
console#configure
console(config)#interface ethernet 1/g1
console(config-if-1/g1)#switchport mode general
console(config-if-1/g1)#switchport general allowed vlan add 10
console(config-if-1/g1)#switchport general pvid 10
console(config-if-1/g1)#exit
console#configure
console(config)#interface ethernet 1/g2
62
Routing Configuration
Layer 3 Switch
192.150.3.1
Physical
Port 1/g1
VLAN 10
Physical Port 1/g3
Physical Port 1/0/3
VLAN 10: 192.150.4.1
VLAN Router Port 3/2
Physical
Port 1/0/1
VLAN 20
192.150.4.1
Layer 2 Switch