Dell 924 - Photo All-In-One Inkjet Owner's Manual page 59

Error Code: Error Message:
1100
Paper jam
1101
Paper out
1102
Incorrect
print head
1103
Missing print
head
1104
Print head
order
1200
Print carrier
stall
1201
Print
incomplete
1203
Print head
short
1204
Print head
programming
1205 Mono TSR error Problem in the mono TSR
1206
Color TSR
error
1208
Incorrect home
position
2100 Unlock scanner The scan carrier has stalled.
What it indicates:
A paper jam exists in the
printer.
The printer is out of paper.
The ink cartridge is not valid.
An ink cartridge has not been
installed.
The ink cartridges have been
installed in the wrong carriers.
The ink cartridge carrier has
stalled.
Data error or incomplete data. Press the Power button
Short circuit detected in the
print head.
Unable to program print head
ID.
circuit.
Problem in the color TSR
circuit.
The printer is unable to locate
the cartridge home position.
Solution:
Clear the paper jam. For more
information, see "Paper Problems" on
page 57.
Load more paper into the printer. For
more information, see "Loading
Paper" on page 19.
Replace the ink cartridge. For more
information, see "Replacing Ink
Cartridges" on page 49.
Install an ink cartridge in the empty
carrier. For more information, see
"Replacing Ink Cartridges" on
page 49.
Swap the ink cartridges. For more
information, see "Replacing Ink
Cartridges" on page 49.
Disconnect the printer power cable,
check for paper jams, and then
reconnect the power cable.
Disconnect and then reconnect the
printer power cable. Reinstall the ink
cartridges. For more information, see
"Replacing Ink Cartridges" on
page 49.
Reinstall the ink cartridges. For more
information, see "Replacing Ink
Cartridges" on page 49.
Reinstall the black ink cartridge. For
more information, see "Replacing Ink
Cartridges" on page 49.
Reinstall the color ink cartridge. For
more information, see "Replacing Ink
Cartridges" on page 49.
Clear the carrier jam and press the
Start button .
Turn off the printer, wait a few
seconds, and then turn on the
printer.
Troubleshooting
to reset.
59