Printing Photos - Dell 924 - Photo All-In-One Inkjet Owner's Manual

Printing Photos

Load the photo paper with the print (glossy) side facing up. For more information, see
1
"Print Media Guidelines" on page 20.
Make sure you have a color cartridge and a photo cartridge installed. For more information,
2
see "Replacing Ink Cartridges" on page 49.
With your document open, click File
3
To customize your print settings, click Preferences, Properties, Options, or Setup
4
(depending on the program or operating system).
The Printing Preferences dialog box opens.
NOTE: If you are using the Dell Picture Studio™ v2.0, select View All Printer Settings to view Print
Properties.
On the Print Setup tab, select Photo, and then select the dpi settings for the photo from
5
the drop-down menu.
Select the paper size, orientation, and the number of copies.
6
NOTE: Photo/glossy paper is recommended for printing photos.
When you are finished customizing your print settings, click OK.
7
Click OK or Print (depending on the program or operating system).
8
To prevent your photos from sticking together or smudging, remove each photo after it
9
exits the paper exit tray.
NOTE: Before placing your prints in a nonadhesive photo album or frame, allow sufficient time for
the prints to dry thoroughly (12 to 24 hours, depending on the ambient conditions). This maximizes
the life of your prints.
24
Using the Printer
Print.