HP 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Installation Instructions Manual page 13

Figure 5: Assembling the outer rails (HP 9000 Series or comparable EIA rack)
SAN Switch Rack Mount Kit Installation Instructions
b. Depending on the rack you are using, complete one of the following tasks:
— For an HP 9000 Series or comparable EIA rack, install two #10-32 x
1/2-inch Phillips pan-head screws with captive star lock washers and two
#10 adapter washers in the upper and lower hole locations of the right rail.
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See Figure 5.
13