M A N A G E M E N - Dell PowerConnect 6224 Release Note

PowerConnect 6224/6224F/6224P/6248/6248P Release Notes
Management
CLI
Description
radius-server mode commands do
not have a "no" form.
SNMP
Description
Not able to set the value for
dellLanMngInfEnable
dot3StatsAlignmentErrors not
incrementing
agentInventoryStackReplicateSTK
object not working as expected
agentStpPortRootGuard object
Web-based Management
Description
Traffic Monitoring Chart Rate Display
Stacking Ports displayed on the
LLDP, LLDP-MED, and Voice VLAN
configuration pages
Browser-specific issue: On the
VRRP Router Configuration page,
the authentication type is not saved
when using Firefox v2.x.
System Firmware Version 3.2.0.6
User Impact
None of the commands in radius-server mode support a "no" form except
for the msgauth command. To reset values to the default, delete the
server and add it back.
User Impact
Management ACLs are always enabled and cannot be disabled.
The value for all ports shows up as 0.
Copies backup image of master to member instead of active image of
master.
Use agentStpCstPortRootGuard instead.
User Impact
The chart displays a count rather than a rate.
The interface selections available on the configuration pages contain the
stacking ports which are not applicable.
To configure the authentication type, either upgrade the browser to Firefox
3.x or use the CLI.
Page 31