Storm-Control: Example - Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual

Etherswitch interface cards
Hide thumbs Also See for HWIC-4ESW - EtherSwitch HWIC Switch:
Table of Contents

Advertisement

Configuration Examples for EtherSwitch HWICs
Flags:D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C -
Connected,
Outgoing interface flags:H - Hardware switched
Timers:Uptime/Expires
Interface state:Interface, Next-Hop or VCD, State/Mode
(*, 209.165.200.230), 01:06:43/00:02:17, RP 0.0.0.0, flags:DC
Incoming interface:Null, RPF nbr 0.0.0.0
Outgoing interface list:
(*, 209.165.200.226), 01:12:42/00:00:00, RP 0.0.0.0, flags:DCL
Incoming interface:Null, RPF nbr 0.0.0.0
Outgoing interface list:
(*, 209.165.200.227), 01:07:43/00:02:22, RP 0.0.0.0, flags:DC
Incoming interface:Null, RPF nbr 0.0.0.0
Outgoing interface list:
(*, 209.165.200.2282), 01:06:43/00:02:18, RP 0.0.0.0, flags:DC
Incoming interface:Null, RPF nbr 0.0.0.0
Outgoing interface list:
Router#

Storm-Control: Example

The following example shows bandwidth-based multicast suppression being enabled at 70 percent on
Fast Ethernet interface 2:
Router# configure terminal
Router(config)# interface FastEthernet0/3/3
Router(config-if)# storm-control multicast threshold 70.0 30.0
Router(config-if)# end
Router# show storm-control multicast
Interface
---------
Fa0/1/0
Fa0/1/1
Fa0/1/2
Fa0/1/3
Fa0/3/0
Fa0/3/1
Fa0/3/2
Fa0/3/3
Fa0/3/4
Fa0/3/5
Fa0/3/6
Fa0/3/7
Fa0/3/8
98
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report
Vlan1, Forward/Sparse, 01:06:43/00:02:17
Vlan2, Forward/Sparse, 01:07:53/00:02:14
Vlan1, Forward/Sparse, 01:06:40/00:02:22
Vlan2, Forward/Sparse, 01:07:44/00:02:17
Vlan1, Forward/Sparse, 01:06:40/00:02:18
Vlan2, Forward/Sparse, 01:06:43/00:02:16
Filter State
Upper
------------
-----
inactive
100.00%
inactive
100.00%
inactive
100.00%
inactive
100.00%
inactive
100.00%
inactive
100.00%
inactive
100.00%
Forwarding
70.00%
inactive
100.00%
inactive
100.00%
inactive
100.00%
inactive
100.00%
inactive
100.00%
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Lower
Current
-----
-------
100.00%
N/A
100.00%
N/A
100.00%
N/A
100.00%
N/A
100.00%
N/A
100.00%
N/A
100.00%
N/A
30.00%
0.00%
100.00%
N/A
100.00%
N/A
100.00%
N/A
100.00%
N/A
100.00%
N/A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hwic-d-9esw

Table of Contents