Fallback Bridging - Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Intrachassis Stacking
For conceptual information about intrachassis stacking, see the
EtherSwitch Network

Fallback Bridging

For conceptual information about fallback bridging, see the
EtherSwitch Network
Default 802.1x Configuration
Table 1
Table 1
Feature
Authentication, authorization, and
accounting (AAA)
RADIUS server
•
•
•
Per-interface 802.1x enable state
Periodic reauthentication
Number of seconds between
reauthentication attempts
Quiet period
Retransmission time
Maximum retransmission number
Multiple host support
Module.
Module.
shows the default 802.1x configuration.
Default 802.1x Configuration
IP address
UDP authentication port
Key
Information About EtherSwitch HWICs
'Intrachassis Stacking"
"Fallback Bridging"
Default Setting
Disabled.
None specified.
•
1645.
•
• None specified.
Disabled (force-authorized).
The port transmits and receives normal traffic without
802.1x-based authentication of the client.
Disabled.
3600 seconds.
60 seconds (number of seconds that the switch remains in
the quiet state following a failed authentication exchange
with the client).
30 seconds (number of seconds that the switch should
wait for a response to an EAP request/identity frame
from the client before retransmitting the request).
2 times (number of times that the switch will send an
EAP-request/identity frame before restarting the
authentication process).
Disabled.
section of the
section of the
5