Clearing All Mac Address Tables - Cisco HWIC-4ESW - EtherSwitch HWIC Switch User Manual

Configuration Examples for EtherSwitch HWICs
Command or Action
Step 3
no mac-address-table static hw-addr
[interface] interface
Example:
Router(config)# no mac-address-table static
0100.5e05.0505 interface 0/3/1 vlan vlan
Step 4
end
Example:
Router(config)# end

Clearing All MAC Address Tables

Follow these steps to remove all MAC address tables.
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
clear mac-address-table
Example:
Router# clear mac-address-table
Step 3
end
Example:
Router# end
Configuration Examples for EtherSwitch HWICs
•
•
•
•
90
-
id [vlan] vlan-id
enable
clear mac-address-table
end
Range of Interface: Examples, page 92
Optional Interface Feature: Examples, page 93
Stacking: Example, page 93
VLAN Configuration: Example, page 93
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Purpose
Enters the static MAC address, the interface, and the VLAN ID
of the port to be removed.
Returns to privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Clears all MAC address tables.
Exits privileged EXEC mode.