Start/Stop Playback; To Select The External Input; Counter Reset - Memorex MVD4543OM User Manual

TO START PLAYBACK
If the unit is in DVD mode, press the SELECT (DVD/VCR) button (on the main unit) or VCR Button (on
the remote) to change the unit to VCR mode.
1
Press the POWER button to turn on the unit and load a
prerecorded tape. (When loading a tape with the Erase
Prevention Tab intact, playback will begin automatically.)
TO STOP PLAYBACK
1
Press the STOP button, the tape will stop, but remain
fully loaded and ready to play.

TO SELECT THE EXTERNAL INPUT

1
Press the AV1/AV2 button to cycle between the inputs (AV1
(rear A/V jacks), AV2 (from A/V jacks) or the Antenna/Cable
TV.
VCR OPERATION (CONTINUED)
1
1
2
If playback does not begin automatically, press the
PLAY/PAUSE ®P button to begin playback. The unit will
automatically adjust the tracking to obtain the best possible
picture.
NOTE: If you are in VCR mode, when playback reaches
the end of the tape, it will stop. Then the tape will be
rewound automatically to the beginning and the unit will
turn off (to the Standby mode) automatically.

COUNTER RESET

1
During playing of a cassette tape, press the COUNTER
RESET/CLEAR button once to reset the counter to
0:00:00.
32