Table of Contents
Advertisement
DVD BASIC OPERATION (GENERAL) (CONTINUED)
PROGRAMMED PLAYBACK
The DVD player in this unit has a 20 chapter programmable memory that allows you to program up to 20 chapters on any
disc for playback in any desired order. You may program 20 different chapters or you may also program certain chapters to
play more than once. To perform programmed playback, proceed as follows:
1
During playback, press the PROGRAM button, the Program
menu will appear on the TV screen.
3
Repeat step 2 until all desired chapters have been
programmed. You can repeat a chapter more than once if
desired.
To program more than 10 programs, scroll to the n symbol at
the bottom right of the screen using the Navigation
(√,®,π,†) buttons 1 and press the PLAY/ENTER button 2.
TO CANCEL THE PROGRAM FUNCTION:
Press the PROGRAM button to enter the program menu, then select STOP using the Navigation (√,®,π,†) buttons, then
press the PLAY/ENTER button. To exit the program menu, select EXIT using the Navigation (√,®,π,†) buttons, then press
the PLAY/ENTER button to exit the menu."
2
1
Select the first title and chapter to be played back using the
Direct Channel Selection/Number buttons (0-9) 1; the next
program will automatically be highlighted.
To enter a title or chapter number larger than 9, press the
2
10+ button2 to enter the first digit (i.e. for Title/Chapter 15,
press the 10+ button 2 once "1-" will appear, then press the
Number 5 button; for Title/Chapter 22, press the 10+ button
2 twice follow by press the Number 2 button, etc.).
NOTE: If an incorrect title or chapter has been entered, it
will remain highlighted and you need to enter the available
chapter again.
4
To play, scroll to START using the Navigation (√,®,π,†)
buttons 1, then press the PLAY/ENTER button 2. Playback
will begin on the first chapter that you programmed and the
player will continue to play all of the chapters that you
programmed in the order in which you programmed them.
44
1
2
Advertisement
Table of Contents
