9.7
M
Most virtualization behavior is specified during virtual application design using the ZENworks
Application Virtualization interface. However, in some cases, it is useful to override virtualization
behaviors at application run-time.
Novell allows the following virtualization settings to be specified on the virtual application
command line. Settings specified on the command line supersede design-time virtual application
settings.
Flag
/XEnv=Variable Name=Value
/XLayerPath=Layer Path
/XSandboxPath=Sandbox Path
/XShellEx=Command
/XShellExVerb=Command Verb
82
ODIFYING VIRTUALIZATION BEHAVIOR AT RUN
Behavior
Specifies additional environment variables.
Multiple /XEnv arguments can be used to add
additional environment variables.
Adds the given SVM file into the virtual
environment. Multiple /XLayerPath arguments
can be used to add additional virtual layers.
Specifies the path to be used for the application
sandbox.
Specifies a shell execute command to be
launched from within the virtual application
environment. This option overrides any startup
files specified in the virtual application
configuration. Only one /XShellEx argument can
be specified.
Specifies the verb to be used in conjunction with
the XShellEx command. The default verb is
OPEN.
Novell ZENworks Application Virtualization
-
TIME