Migrating Personality Settings By Using The Command Prompt - Novell ZENWORKS 10 PERSONALITY MIGRATION - PERSONALITY MIGRATION REFERENCE 10.3 30-03-2010 Use And Installation Instructions

NOTE: You must not launch multiple personality migration bundles at the same time on the same
device. If you do so, the bundles are not launched correctly. The log of the bundle that was first
launched is the only log stored in the
user profiles for the bundles are not deleted. You must manually delete them.
1 Create a Store Personality action.
For more information, see
Management Software Distribution
2 Assign this bundle to a user or a device, whose user's personality needs to be migrated.
For more information on assigning the bundle, see
the ZENworks 10 Configuration Management Software Distribution
3 Create an Apply Personality action.
For more information, see
Management Software Distribution
4 Assign this bundle to the user to whom you want to apply the personality.
For more information on assigning the bundle, see
the ZENworks 10 Configuration Management Software Distribution
The personality settings are applied to the user on the destination system when the Apply
Personality action is launched.
IMPORTANT: After applying the personalities, reboot the devices for the personalities to take
effect. In order to ensure this, add the Reboot/Shutdown action to the bundle. For more
information, see "Creating Directive
Software Distribution
5.4 Migrating Personality Settings by Using the
Command Prompt
1 Run the migration program as an administrator:
Method 1:
1. Open a command prompt in Windows by clicking Start > All Programs > Accessories.
Right-click Command Prompt, then click Run as Administrator.
2. Change to the ZENworks Personality Migration installation directory.
Method 2:
1. In the directory where you have installed Personality Migration, right-click the
PersonalityMigrationCore.exe
2. Click Properties > Compatibility.
3. In the Privilege Level group, select Run the program as an administrator, then click OK.
4. Open a command prompt in Windows by clicking Start > All Programs > Accessories >
Command Prompt.
5. Change to the ZENworks Personality Migration installation directory.
2 On the source device, store the personality by using the following command:
PersonalityMigrationCore.exe --store --template=value --file=value
personalitylog.xml
"Creating Directive Bundles" in the
Reference.
"Creating Directive
Reference.
Bundles" in the
Reference.
file.
file. Also, the dynamic administrator
ZENworks 10 Configuration
"Assigning Existing Bundles to
Reference.
Bundles" in the ZENworks 10 Configuration
"Assigning Existing Bundles to
Reference.
ZENworks 10 Configuration Management
Automatically Migrating Personality Settings
Users" in
Users" in
39