Command Prompt Options To Store And Apply Personalities - Novell ZENWORKS 10 PERSONALITY MIGRATION - PERSONALITY MIGRATION REFERENCE 10.3 30-03-2010 Use And Installation Instructions

You can also use the password, span-size, no-span, and log options. However, these are
optional.
For example,
PersonalityMigrationCore.exe --store --template=C:\template.xml --
file=C:\users.pnp --log=C:\users.log
For more information on options, see
Apply Personalities," on page
3 On the destination device, apply the personality by using the following command:
PersonalityMigrationCore.exe --apply --template=value --file=value
You can also use the password and log options. However, these are optional.
For example,
PersonalityMigrationcore.exe --apply --template=C:\template.xml --
file=C:\users.pnp --log=C:\users.log
For more information on options, see
Apply Personalities," on page
5.5 Command Prompt Options to Store and
Apply Personalities
Command Prompt Options
Table 5-1
Option
file
template
span-size
no-span
password
with-options
log
40 ZENworks 10 Personality Migration Reference
Section 5.5, "Command Prompt Options to Store and
40.
Section 5.5, "Command Prompt Options to Store and
40.
Description/Value
The complete path and the name of the PNP file
The complete path and the name of the template
The size of spanned files in megabytes (MB)
The default span-size is 650 MB and the maximum span-size is 2 GB
Migrates personalities without span
The password to access the PNP file
The filename in which the command line parameters are stored when a command
exceeds 256 characters
The complete path and name of the log file