Modifying An Iprint Printer; Section C.2.4, "Modifying An Iprint Printer; On A Zenworks Server, Enter The Command As Follows; Iprint_Printer_Configuration File -Username Username -Password Password Example - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual

Options Used with the Rename Command
Table C-3
Option Description
uri URI of the iPrint printer to search.
uri2 URI of the iPrint printer to rename.
default Whether this is the default printer. The available options are true or false.
updatedriver Update the printer driver. The available options are true or false.
username and Credentials of the ZENworks administrator.
password
server IP address of the ZENworks server.
port Port of the ZENworks server. The default port is 80.
To refer to the online help for the command, enter the following command:
ippman rename -help
C.2.4 Modifying an iPrint Printer
To create a new iPrint printer configuration for all policies that match specific printer URI criteria,
and modify the default settings:
1 Create the iPrint printer configuration file.
For information on creating the iPrint printer configuration file, see
"Understanding the Format of the iPrint Printer Configuration File," on page
2 Use the
ippman modify

On a ZENworks server, enter the command as follows:

ippman modify -uri iprint_printer_uri -conf
iprint_printer_configuration file -username username -password
password
Example:
ippman modify -uri ipp://10.0.0.0/ipp/Printer1 -conf
"c:\\printerdata.xml" -username Administrator -password xxxxx
On a device other than the ZENworks server, enter the command as follows:
ippman modify -uri iprint_printer_uri -conf

iprint_printer_configuration file -server ZENworks_server_ip -port

port_number -username username -password password

Example:
ippman modify -uri ipp://10.0.0.0/ipp/Printer1 -conf
"c:\\printerdata.xml" -server 10.0.0.0 -port 80 -username
Administrator -password xxxxx
command.
Section C.3,
105.
iPrint Policy Management Utility 101