Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - MIGRATION GUIDE 10.3 30-03-2010 Migration Manual page 60

Instructions for handling failed migration items are covered in
During migration, a temporary working folder is created on the workstation for each
workstation being migrated. These folders are deleted as each workstation is successfully
migrated.
IMPORTANT: The migrated workstations do not immediately display in the Workstations
section on the Devices tab in ZENworks Control Center. They are listed in the Deployable
Devices panel in ZENworks Control Center and must have the adaptive agent deployed to them
in order to be displayed on the Devices tab. For more information on deploying the adaptive
agent to the migrated workstations, see
Managed," on page
8 After the migration has completed, do the following as needed:
8a Review the teal-colored items in both of the Select panels to determine whether you need
to queue any other items for migration or delete any previously migrated items from the
Destination Zone panel.
You can also use the Migration History tab to discover this information.
8b On the Items to Migrate tab, click the Failed - View Log button for each item that failed to
migrate, and determine the best course of action. You can either fix the problem and
migrate the item, or you can delete it from the Items to Migrate tab, which also deletes it
from the queue in the Destination Zone panel.
To view only those items that failed, right-click anywhere in the panel and select Delete
successful to filter the listed items. This listing is maintained only for the current task.
8c If you have failed items that you do not want to migrate, you can delete only those that are
queued (still dimmed) from the queue in the Destination Zone panel. Right-click
anywhere on the Items to Migrate tab and select Delete all items.
This empties the Items to Migrate tab listing. It also deletes only the queued items not yet
migrated from the Destination Zone panel listing.
WARNING: If you select Delete all items in the Destination Zone panel instead, this
deletes all listed items from both the Destination Zone panel and the Migration History
tab, as well as from the ZENworks database, effectively removing them from ZENworks
Control Center. To delete only the queued (not yet migrated) items by using Delete all
items, it is safest to do so from the Items to Migrate tab.
9 When you are satisfied with the migration results, continue with one of the following:
To migrate other workstations, continue with
60 ZENworks 10 Configuration Management ZENworks Migration Guide
66.
If you discover other items to migrate, repeat
To delete any items listed in the Destination Zone panel, select them and click .
WARNING: The Destination Zone panel displays both previously migrated data
with teal-colored text and items with black-colored text that were either created in
ZENworks Control Center or migrated from a different workstation. The delete
option ( ) can be used on both. Therefore, it is possible to delete previously existing
items from Configuration Management that were never migrated. This includes
folders in ZENworks Control Center and all data contained under them.
Section 4.11, "Setting Up Migrated Workstations to be
Step 3 through
Step 3 on page
Step 8.
Step 7.
58.