Table of Contents
Advertisement
2 Mount the driver pack ISO. Instructions for using the ISO are available in
tion 5.1, "Virtual CD Readers"
3 Enter rpmbuild - rebuild xxx.src.rpm , where xxx is the name for
the source RPM. This creates a binary RPM in /usr/src/redhat/RPMS/
arch/, where arch is the architecture of the virtual machine.
7.4 SUSE Drivers for Red Hat
Enterprise Linux 5 on Xen
This section provides instructions for installing, uninstalling, and updating the SUSE
Drivers for Red Hat Enterprise Linux 5 on Xen.
7.4.1 Installing the RHEL 5 Drivers
1 Open a terminal.
2 Mount the driver pack ISO. For instructions on how to use the ISO images see
Section 5.1, "Virtual CD Readers"
(Optional) If you are installing from an RPM that you built, the RPM is located
in /usr/src/redhat/RPMS/arch, where arch is the architecture of the
virtual machine. See
more information.
3 Install the RPM.
3a Open a terminal.
3b Enter rpm -U xxx.rpm , where xxx is the RPM filename.
3c Edit the /boot/grub/menu.lst file and make the following changes:
• Set the default= xxx (where xxx is the old boot entry) to default=0,
which is the boot entry with the latest initrd.
(page 33).
(page 33).
Section 7.4.5, "Building Your Own RPMs"
Sec-
(page 81) for
Virtual Machine Drivers
77
Advertisement
Table of Contents
