Novell PLATESPIN ORCHESTRATE 2.0.2 - DEVELOPMENT CLIENT REFERENCE 08-28-2009 Reference page 121

In the Fact Editor, this fact is listed as
<fact name="user.sessions" value="1" type="Integer" />
Accounting Information
Total Spending: This field displays the total cost of computing resources by this user.
In the Fact Editor, this fact is listed as
<fact name="user.history.cost.total" value="0.0088" type="Real" />
Average Spending Rate: This field displays the computed moving average spending (in dollars per
hour) over the last hour of activity for this user.
In the Fact Editor, this fact is listed as
<fact name="user.account.spendrate" value="-0.0006" type="Real" />
Maximum Spending Rate: This value specifies an amount (in dollars per hour) to be used by the
Resource Scheduler to throttle the rate at which computing cycles are consumed by the user. A value
of less than or equal to zero (<=0) turns the feature off.
In the Fact Editor, this fact is listed as
<fact name="user.account.maxspendrate" value="0.0000" type="Real" />
Default Accounting Group: This drop-down list lets you select the default User Group to be billed
for work conducted by this user.
In the Fact Editor, this fact is listed as
<fact name="user.accountinggroup" value="all" type="String" />
Total Wall Time: This field displays the total amount of wall time (in seconds) consumed by this
user.
In the Fact Editor, this fact is listed as
<fact name="user.history.time.total" value="31" type="Integer" />
Total Grid Time: This field displays the total amount of grid time (in gcycles, which is a
normalized average of compute cycles) consumed by this user.
In the Fact Editor, this fact is listed as
<fact name="user.history.gcycles.total" value="31" type="Integer" />
Job Control
Default Priority Value: This value specifies a numerical representation of the default priority at
which this user's job runs, with "1" being the lowest priority and "9" being the highest priority.
In the Fact Editor, this fact is listed as
<fact name="user.priority.default" value="7" type="Integer" />
Default Priority: This field displays the string representation of the default priority at which this
user can run a job. The value is matched to the integer value in
:
user.sessions
user.history.cost.total
user.account.spendrate
user.account.maxspendrate
user.accounting.group
user.history.time.total
user.history.gcycles.total
user.priority.default
:
:
:
:
:
:
:
user.priority.default
.
The Explorer Tree 121