Using A Container Admin To Install And Configure Dsfw - Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR WINDOWS Manual

This completes the process of DSfW installation. But the server is not ready for use till you
complete configure DSfW and the supporting services through the process of provisioning.
12 To start provisioning, do one of the following:
From the terminal, run the
Launch YaST. The DSfW Provisioning Wizard is listed as an option.
To authenticate, enter the password of the current domain.
For more details on Provisioning, see
page 103
13 The DSfW server is now ready for use. Verify that eDirectory and DSfW have been installed
and configured correctly by executing the instructions in
Installation," on page
6.3 Using a Container Admin to Install and
Configure DSfW
For this procedure, assume that you want to configure DSfW in an existing tree with
o=novell,ou=india.o=novell and ou=blr.ou=india.o=novell
The replica looks like:
o=novell
cn=srv1.o=novell(M),
cn=srv2,ou=india,o=novell(RW)
ou=india.o=novell
cn=srv2,ou=india,o=novell(M)
ou=blr.ou=india.o=novell
cn=srv3.ou=blr.ou=india.o=novell(M)
Pre-Requisites:
To install DSfW in partition
dc=india,dc=novell,dc=com
You must have at least one eDirectory 8.8 SP2 and above server in the tree that holds a writable
replica of the root partition.The root partition should be present on the server which is holding
the name-mapped container. This is required for creating partitions and moving replicas around
during DSfW configuration
To configure a container admin:
1 Create a container in an already existing tree.
eg:ou=india.o=novell
2 Install or configure a server under this container.
/opt/novell/xad/sbin/provision_dsfw.sh
"Provisioning Domain Services for Windows" on
125.
ou=india,o=novell
.
Chapter 8, "Verifying DSfW
as root partitions.
, it must be mapped to
Installing Domain Services for Windows 101
script.