Novell LINUX ENTERPRISE SERVER 10 SP2 - ARCHITECTURE-SPECIFIC INFORMATION Supplementary Manual page 30

Figure 2.1 Example:
IPL from ESCON or FICON Attached Tape
If you cannot IPL from CD-ROM, create a channel attached tape from which to IPL
the SUSE Linux Enterprise Server installation image. Use the LOAD button in the SE
or HMC with the tape device address as the load address to IPL the SUSE Linux Enter-
prise Server installation system.
There are many ways to create an IPLable tape. One is to copy the files:
/boot/tapeipl.ikr
/boot/parmfile
/boot/initrd
as binary files from CD 1 (for example, using FTP from a Linux workstation).
Name them
SLES10 IMAGE
SLES10 PARM
SLES10 INITRD
20 Architecture-Specific Information