Novell LINUX ENTERPRISE SERVER 10 SP2 - ARCHITECTURE-SPECIFIC INFORMATION Supplementary Manual page 25

Architecture-specific information
Hide thumbs Also See for LINUX ENTERPRISE SERVER 10 SP2 - ARCHITECTURE-SPECIFIC INFORMATION:
Table of Contents

Advertisement

accomplished, follow the installation overview of the desired installation mode to install
SUSE Linux Enterprise Server on your system.
As described in
Section 2.1, "Making the Installation Data Available"
are two different installation modes for Linux on IBM System z:
• LPAR Installation
• z/VM Installation
Procedure 2.1 Installation Overview of LPAR Installation
1 Prepare the devices needed for installation. See
(page 16).
2 IPL the installation system. See
3 Configure the network. See
4 Connect to the SUSE Linux Enterprise Server installation system. See
"Connecting to the SUSE Linux Enterprise Server Installation System"
5 Start installation using YaST and IPL the installed system. See Chapter 3, Instal-
lation with YaST (↑Installation and Administration).
Procedure 2.2 Installation Overview of z/VM Installation
1 Prepare the devices needed for installation. See
(page 17).
2 IPL the installation system. See
3 Configure the network. See
4 Connect to the SUSE Linux Enterprise Server installation system. See
"Connecting to the SUSE Linux Enterprise Server Installation System"
5 Start installation using YaST and IPL the installed system. See Chapter 3, Instal-
lation with YaST (↑Installation and Administration).
Section 2.3.1, "LPAR Installation"
Section 2.4.1, "LPAR Installation"
Section 2.5, "Network Configuration"
Section 2.3.2, "z/VM Installation"
Section 2.4.2, "z/VM Installation"
Section 2.5.1, "z/VM Installation"
(page 11), there
(page 19).
(page 24).
Section 2.6,
(page 26).
(page 21).
(page 25).
Section 2.6,
(page 26).
Preparing for Installation
15

Advertisement

Table of Contents
loading

Table of Contents