Novell LINUX ENTERPRISE SERVER 10 SP2 - ARCHITECTURE-SPECIFIC INFORMATION Supplementary Manual page 27

2.3.2 z/VM Installation
Adding a Linux Guest
The first step is to attach and format one or multiple DASDs in the system to be used
by the Linux guest in z/VM. Next, create a new user in z/VM. The example shows the
directory for a user LINUX1 with the password LINPWD, 256 MB of memory (extend-
able up to 512 MB), 32 MB of expanded RAM (XSTORE), some minidisks (MDISK),
two CPUs and an OSA QDIO device.
TIP: Assigning Memory to z/VM guests
When assigning memory to a z/VM guest, make sure that the memory size suits
the needs of your preferred installation type. See
ments" (page 2). To set the memory size to 512 MB, use the command CP
DEFINE STORAGE 512M. After the installation has finished, reset the memory
size to the desired value.
Section "Memory Require-
Preparing for Installation 17