Table of Contents
Advertisement
Recording Cluster-Specific Information for a Post Office and Its POA
To permanently record important cluster-specific information for a post office:
1 In ConsoleOne, browse to and right-click the Post Office object, then click Properties.
2 In the Description field of the post office Identification page, provide a cluster-specific
description of the post office, including the secondary IP address of its cluster-enabled volume
and the cluster-unique port numbers used by its POA.
3 Click OK to save the post office description.
4 Select the Post Office object to display its contents.
5 Right-click the POA object, then click Properties.
6 In the Description field of the POA Identification page, record the secondary IP address of the
cluster-enabled post office volume and the cluster-unique port numbers used by the POA.
This information appears on the POA console, no matter which node in the cluster it is
currently running on.
7 Click OK to save the POA description.
8 If necessary, continue with
Distribution Directory" on page
or
Skip to
Recording Cluster-Specific Information for a Software Distribution Directory
To permanently record important cluster-specific information about a software distribution directory
located on a cluster-enabled volume:
1 In ConsoleOne, click Tools > System Operations > Software Directory Management.
2 Select the software distribution directory, then click Edit.
3 In the description field, record the secondary IP address of the cluster-enabled volume where
the software distribution directory resides.
4 Click OK, then click Close to save the software distribution directory description.
5 Skip to
3.7.2 Using Novell Remote Manager on NetWare 6.5
On NetWare 6.5, you can use Novell Remote Manager to manage many aspects of your GroupWise
cluster from your Web browser. For instructions on setting up and accessing this useful network
administration utility, see the NetWare 6.5 Novell Remote Manager Administration Guide at the
Novell Documentation Web site
features are automatically added to Novell Remote Manager when you install Novell Cluster
Services.
After you have accessed Novell Remote Manager, you might find that many GroupWise cluster
management tasks are easier to perform with Novell Remote Manager than with ConsoleOne. The
following sections help you configure and manage the cluster using Novell Remote Manager:
"Configuring Your GroupWise Cluster" on page 59
"Managing Your GroupWise Cluster" on page 60
58
GroupWise 8 Interoperability Guide
"Recording Cluster-Specific Information for a Software
58.
"Knowing What to Expect in MTA and POA Failover Situations" on page
"Knowing What to Expect in MTA and POA Failover Situations" on page
(http://www.novell.com/documentation). Cluster management
61.
61.
Advertisement
Table of Contents
