Installing Or Upgrading Novell Edirectory On Linux 3.1 System Requirements - Novell EDIRECTORY 8.8 SP3 Installation Manual

Installing or Upgrading Novell
3
eDirectory on Linux
Use the following information to install or upgrade Novell
Section 3.1, "System Requirements," on page 45
Section 3.2, "Prerequisites," on page 46
Section 3.3, "Hardware Requirements," on page 48
Section 3.4, "Forcing the Backlink Process to Run," on page 48
Section 3.5, "Upgrading eDirectory," on page 48
Section 3.6, "Installing eDirectory," on page 57
3.1 System Requirements
Following are the supported platforms for 32-bit eDirectory:
32-bit operating system such as,
SUSE Linux Enterprise Server 9 SP4
SUSE Linux Enterprise Server 10 SP1 or later versions
SUSE Linux Enterprise Server (SLES) 10 SP1 XEN
Red Hat Advanced Server 4
Red Hat 5.0 or later versions
Red Hat 5.0 AP Virtualization
64-bit operating system such as,
SUSE Linux Enterprise Server (SLES) 9 SP4
SUSE Linux Enterprise Server (SLES) 10 SP1 or later versions
SUSE Linux Enterprise Server (SLES) 10 SP1 XEN
NOTE: eDirectory 8.8 SP3 is supported on SLES 10 XEN virtualization service that
runs the SLES 10 guest OS. The following updates are available at
update.novell.com
SUSE-Linux-Enterprise-Server-X86_64-10-0-20061011-020434
SLES10-Updates
For registering and updating SUSE Linux Enterprise 10, refer to
Linux Enterprise 10 with the Novell Customer Center (http://support.novell.com/
techcenter/articles/RegandUpdate_SLE10.html). After installating the latest update,
ensure that the minimum patch level of the installed update is 3.0.2_09763-0.8.
To determine the version of SUSE Linux you are running, see the /etc/SuSE-release
file.
Red Hat Advanced Server 4
®
(https://update.novell.com).
Installing or Upgrading Novell eDirectory on Linux
eDirectory 8.8 on a Linux* server:
TM
https://
Registering SUSE
3
45