Table of Contents
Advertisement
The trustee entry could be similar to the following entry:
<addTrustee>
<name>BCCAdmin.users.lab.acme_tree</name>
<fileName>sys:\tmp</fileName>
<rights>
<read/>
<write/>
<create/>
<erase/>
<fileScan/>
<modify/>
</rights>
</addTrustee>
Note the following items with this example:
The
The
The rights must be
You must add the trustee entry to all the NetWare nodes in your BCC.
IMPORTANT: Make sure that you edit each
the BCC entry rather than copy the file from server to server.
After the
be rebooted. This can be done in a rolling fashion. You should start with the node that has the
highest IP address first and work down in IP address order. This speeds the rate at which the
Novell Cluster Services master node acquires the change.
4.4 Installing and Configuring the Novell
Business Continuity Clustering Software
It is necessary to run the Novell Business Continuity Clustering installation program when you want
to:
Install the Business Continuity Clustering engine software on cluster nodes for the clusters that
will be part of a business continuity cluster.
The Business Continuity Clustering installation installs to only one cluster at a time. You must
run the installation program again for each NetWare cluster that you want to be part of a
business continuity cluster.
Install the BCC-specific Identity Manager templates for iManager snap-ins on either a NetWare
6.5 SP5 or SP6 server (same as OES 1 SP2 NetWare) or a Windows server.
The templates add functionality to iManager so you can manage your business continuity
cluster. You must have previously installed iManager on the server where you plan to install the
templates.
50
BCC 1.1 SP2: Administration Guide for NetWare 6.5 SP8
element is the BCC Administrator user. The tree name is required.
<name>
element must be
<filename>
.
RWCEMF
file has been modified on all NetWare nodes, the NetWare nodes must
trustees.xml
sys:\tmp
file on each cluster node to add
trustees.xml
Advertisement
Table of Contents
