Configuration Quick Start; New Identity Server Cluster Configuration - Novell ACCESS MANAGER 3.1 SP1 - QUICK STARTS 11-20-2009 Quick Start Manual

Configuration Quick Start

2
A basic configuration has three Access Manager components (an Administration Console, an
Identity Server, and an Access Gateway), an LDAP server, and Web servers with applications and
data. Figure 2-1 illustrates a configuration where these components are installed on separate
machines.
Modules Required for a Basic Configuration
Figure 2-1
Administration Console
This section explains how to configure your system so that user in your LDAP server can log in and
access a protected resource on a Web server.
Section 2.1, "New Identity Server Cluster Configuration," on page 13
Section 2.2, "First Reverse Proxy Configuration," on page 16
Section 2.3, "Configuring the Protected Resource for Authentication," on page 17

2.1 New Identity Server Cluster Configuration

This section explains how to add your Identity Server to a cluster and how to configure the cluster to
communicate with the LDAP server and use its authentication credentials.
Identity Server
Access Gateway
LDAP Server
Web Servers
2
Configuration Quick Start 13