MSI 890GXM User Manual page 43

▶ OC Step
Ths tem s used to set how many steps for FSB colck overclockng.
▶ OC Step Count Tmer
Ths tem s used to set the buffer tme for every step.
▶ Adjust CPU Rato
Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the
processor supports ths functon.
▶ Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
▶ Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
▶ Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU-NB frequency. Read-only.
▶ CPU Core Control
Ths tem allows you to select the number of actve processor cores.
▶ OC Gene Lte
Ths tem s bult for auto detectng the overclockng speeder of CPU and GPU for cur-
rent settng. When t set to [wth GPU], the onboard ntegrated GPU frequency wll set
to 800 MHz automatcally.
▶ Memory-Z
Press <Enter> to enter the sub-menu.
▶ DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformaton of
nstalled memory.
▶ Advance DRAM Configuraton
Press <Enter> to enter the sub-menu.
▶ DRAM Tmng Mode
Ths field has the capacty to automatcally detect all of the DRAM tmng.
▶ DRAM Drve Strength
Ths tem allows you to control the memory data bus' sgnal strength. Increasng the
drve strength of the memory bus can ncrease stablty durng overclockng.
▶ DRAM Advance Control
Ths field has the capacty to automatcally detect the advanced DRAM tmng. If you
set ths field to [DCT 0], [DCT 1] or [Both], some fields wll appear and selectable.
▶ 1T/2T Memory Tmng
Ths tem controls the SDRAM command rate. Select [1T] makes SDRAM sgnal
controller to run at 1T (T=clock cycles) rate. Selectng [2T] makes SDRAM sgnal
controller run at 2T rate.
Englsh
En-33