Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.9 No. 18)
Shared USB 2.0 Header
(9-pin USB4_5)
USB_PWR
(see p.9 No. 29)
Infrared Module Header
(5-pin IR1)
(see p.9 No. 16)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.9 No. 24)
(AUX1: see p.9 No. 25)
Front Panel AC'97 Audio Header
(8-pin AUDIO1)
(see p.9 No. 22)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
connector of the power supply.
power supply
ASRock I/O Plus
USB_PWR
dates 6 default USB 2.0 ports. If
P-7
P+7
GND
those USB 2.0 ports on the I/O
DUMMY
panel are not sufficient, this
1
USB 2.0 header is available to
GND
P+6
P-6
support 2 additional USB 2.0
USB_PWR
ports.
This USB4_5 connector is shared
1
with the USB 2.0 ports 4,5 on
USB_PWR
P-5
P-4
ASRock I/O Plus
P+5
P+4
the front panel USB ports by
GND
GND
DUMMY
attaching the front panel USB
cable to this connector
(USB4_5), the USB ports 4,5 on
ASRock I/O Plus
to function.
IRTX
This header supports an
+5VSB
DUMMY
optional wireless transmitting
1
and receiving infrared module.
GND
IRRX
These connectors allow you
to receive stereo audio input
AUX-L
CD-L
GND
GND
GND
GND
from sound sources such as
AUX-R
CD-R
a CD-ROM, DVD-ROM, TV
CD1
AUX1
tuner card, or MPEG card.
This is an interface for front
GND
panel audio cable that allows
BACKOUT-R
convenient connection and
BACKOUT-L
control of audio devices.
1
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
TM
accommo-
TM
. When using
TM
will not be able
1 9
1 9
1 9
1 9
1 9
Advertisement
Table of Contents
