Main Memory; Desktop Board D915Gav/D915Gag Memory Configurations - Intel 915G - Matx DDR2-533 LGA775 Product Manual

Main Memory

NOTE
To be fully compliant with all applicable Intel
be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your
memory modules do not support SPD, you will see a notification to this effect on the screen at
power up. The BIOS will attempt to configure the memory controller for normal operation.
The desktop board supports dual or single channel memory configurations.
Desktop boards D915GAV and D915GAG support dual or single channel memory configurations
defined in Table 5.
Table 5.

Desktop Board D915GAV/D915GAG Memory Configurations

Memory Speed
DDR 400
DDR 333
Desktop boards D915GAV and D915GAG support:
•
Four 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory Module (DIMMs)
connectors with gold-plated contacts
•
Unbuffered, non-registered single or double-sided DIMMs
•
Serial Presence Detect (SPD) memory only
•
Non-ECC RAM
•
2.5 V memory
•
Memory configuration listed below:
⎯ Up to 1.0 GB utilizing 128 Mb technology
⎯ Up to 2.0 GB utilizing 256 Mb technology
⎯ Up to 4.0 GB utilizing 512 Mb or 1 GB technology
Processor
Pentium 4 processor
Pentium 4 processor
®
SDRAM memory specifications, the board should
FSB frequency (MHz)
800
533
800
533
Desktop Board Features
Memory Speed Outcome (MHz)
400
400
333
333
17