Asus A7S266-VM User Manual page 27

12. Serial connector (9-pin COM2 )
This 9-pin connector connects to the Serial COM2 bracket. Connect
the COM2 cable to this connector and install the bracket on an
available slot in the rear panel of the chassis.
®
A7S266-VM
A7S266-VM Serial COM2 Bracket
13. System panel connector (20-pin PANEL1)
This connector accommodates several system front panel functions.
®
A7S266-VM
A7S266-VM System Panel Connectors
• System Power LED Lead (2-pin PLED)
This 2-pin connector connects to the system power LED. The LED
lights up when you turn on the system power.
• System Warning Speaker Lead (4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker and
allows you to hear system beeps and warnings.
ASUS A7S266-VM Motherboard
COM2
PIN 1
Speaker
Connector
Power LED
Message LED
ATX Power
SMI Lead
Switch*
Requires an ATX power supply.
*
Reset SW
1-17