Entering Characters By Tapping The Keypad - Samsung M620 - SPH UpStage Cell Phone Manual

Note: Since the T9 prediction listing starts at three letters, when
working with two letters, use the (0) key to begin cycling
through possible two-letter choices. If, as an example, you
type the word
the word
to the next possible word choice, which is
To accept a word and insert a space, press

Entering Characters by Tapping the Keypad

To enter characters by tapping the keypad:
1.
Select the Alpha mode (See "Selecting a Character Input
Mode" on page 63).
Tip: When entering text in this mode, press the * (Shift) key to
change letter capitalization ( abc
current character.
2.
Press the corresponding keys repeatedly until the
desired letter appears.
3.
To enter the word "Bill," press
times,
(If you make a mistake, press
character. Press and hold
66
Go
In
, but by pressing the (0) key you can cycle through
Once for the first letter
Twice for the second letter
And so on
three times, and
5
J L
K
(keys 4 and 6), T9 prediction might provide
>
5
to delete an entire entry.)
Go
.
#
>
ABC ) used on the
Abc
twice,
2
4
ABC
three times again.
J L
K
to erase a single
Section 2A: Phone Basics
.
Space
three
GHI