Using Speed Dialing - Samsung M620 - SPH UpStage Cell Phone Manual

Using Speed Dialing

You can store up to 98 numbers in your phone's speed dial
memory to make contacting friends and family as easy as
pressing a button or two. With this feature, you can dial
speed dial entries using one key press for locations 2–9 or
two key presses for locations 10–99. For information about
assigning speed dial numbers, see "Assigning Speed Dial
Numbers" on page 139.
Note: You cannot use 1 as a user-defined speed dial entry because it
is reserved for speed dialing your voicemail access number.
To use One-Touch Dialing for speed dial locations 2–9:
Press and hold the appropriate key for approximately
two seconds. The display confirms that the number has
been dialed when it shows the name and number of the
speed dial.
To use Two-Touch Dialing for speed dial locations 10–99:
1.
Press the first digit.
2.
Press and hold the second digit for approximately two
seconds. The display confirms that the number has been
dialed when it shows the name and number of the
speed dial.
Note: Speed dialing is not available when you are roaming.
When you are roaming off the Sprint National Network, you
must always dial using 11 digits (1 + area code + number).
62
MENU
OK
Section 2A: Phone Basics