Turning Your Phone On And Off - Samsung M620 - SPH UpStage Cell Phone Manual

T9 Text Input lets you quickly type messages with one
keypress per letter (page 65).
Speed dial lets you dial phone numbers with one or two
key presses (page 62).

Turning Your Phone On and Off

Turning Your Phone On
To turn your phone on:
Press and release
Once your phone is on, the Phone Display screen may display
a "Searching" screen, which indicates your phone is searching
for a signal from Sprint. When your phone does finds a signal,
it automatically enters standby mode – the phone's idle state.
At this point, you are ready to begin making and receiving
calls.
Note:
You can change the default power-up side through
Settings > Display > Power Up Screen
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for Sprint service by pressing any key (when your
phone is turned on).
Note: The Power Save feature helps to conserve your battery power
when you are in an area where there is no signal.
28
on your wireless phone.
Section 2A: Phone Basics
Menu >
.