Video Mode; Taking A Geotagged Photo - Gigabyte GSmart MS802 User Manual

User manual - gsmart ms802 english version
Hide thumbs Also See for GSmart MS802:
Table of Contents

Advertisement

8.2 Video Mode

The device camera can also be used as a video
recorder to record memorable moments of your life.
1. Select Start > Programs > Multimedia > Camera
>
, or directly press, and hold Camera Key >
to enter into video mode.
2. Focus on the picture you want to film and press
Camera Key to start video filming.
3. Press Camera Key again to stop filming.
4. Tap
to change camera settings.
5. Select
on screen to enter into Pictures &
Videos.
Video Menu:
Camera Mode: Tap this icon to switch to
camera mode.
Pictures & Videos: View your video here.
Video Settings: Open the menu for video
recorder settings.
Front Camera: Use the camera which is
located at the front of the device.
Video Settings:
1. Mode: You may select different recording modes
to fit the recording environment.
2. Effect: You may apply many different photo
effects.
3. Video Format: You can select the wanted format
to record a film.
4. MMS Video: You can select to make a recording
especially for MMS.
5. Storage: Phone, Memory Card. (The storage
location will automatically change to Memory
Card, if Memory Card is plugged in before
launching video Recorder).
6. Confirmation: On or Off.

8.3 Taking a GeoTagged Photo

You can take GeoTagged photos (photos that carry
the coordinates of where you were when you took
them) and easily share them with friends through
online albums like Flickr.
1. After turning on the camera, tap the GPS button
on the lower-left corner of the preview screen
to enable/disable the GPS coordinates
photograph function.
MS802│ 8-2

Advertisement

Table of Contents
loading

Table of Contents