Standard Cmos Features - JETWAY V500DAR1A User Manual

3-4 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into several categories.
category includes no, one or more than one setup items. Use the arrow keys to highlight the
item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
> IDE Primary Master
> IDE Primary Slave
> IDE Secondary Master
> IDE Secondary Slave
Drive A
Drive B
Video
Halt On
Base Memory
Extended Memory
Total Memory
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Date
The date format is <day><month><date><year>.
Day Day of the week, from Sun to Sat, determined by BIOS. Read-only.
The month from Jan. through Dec.
Month
Date The date from 1 to 31 can be keyed by numeric function keys.
Year The year depends on the year of the BIOS.
Time
The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type.
specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category. If your hard disk drive type is
not matched or listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items.
Enter the information directly from the keyboard. This information should be provided in
the documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
Standard CMOS Features
Tue, Jul, 24 2003
16 : 45 : 35
Press Enter None
Press Enter None
Press Enter None
Press Enter None
1.44M, 3.25 in.
None
EGA/VGA
All,But Keyboard
640K
56320K
57344K
F6:Optimized Defaults
23
Item Help
Menu Level >
Change the day, month,
year and century
F7:Standard Defaults
Note that the
Each