Standard Cmos Features - JETWAY PT800DB - REV 1.0 User Manual

3-4 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into several categories. Each category
includes no, one or more than one setup items. Use the arrow keys to highlight the item and then
use the <PgUp> or <PgDn> keys to select the value you want in each item.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
> IDE Primary Master
> IDE Primary Slave
> IDE Secondary Master
> IDE Secondary Slave
Drive A
Drive B
Video
Halt On
Base Memory
Extended Memory
Total Memory
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Date
The date format is <day><month><date><year>.
Day Day of the week, from Sun to Sat, determined by BIOS. Read-only.
Month The month from Jan. through Dec.
Date The date from 1 to 31 can be keyed by numeric function keys.
Year The year depends on the year of the BIOS.
Time
The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of
your drive must match with the drive table. The hard disk will not work properly if you enter
improper information for this category. If your hard disk drive type is not matched or listed, you
can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter the
information directly from the keyboard.
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
Standard CMOS Features
Mon, Nov, 24 2003
16 : 45 : 35
Press Enter None
Press Enter None
Press Enter None
Press Enter None
1.44M, 3.25 in.
None
EGA/VGA
All,But Keyboard
640K
56320K
57344K
F6:Optimized Defaults
This information should be provided in the
23
Item Help
Menu Level >
Change the day, month,
year and century
F7:Standard Defaults