Table of Contents
Advertisement
As well attach the delivered Y-cables to the "green" port (former PS/2 Mouse port)
and into the "violet" port (former PS/2 Keyboard port) at the rear side of the
motherboard.
Connect the 1
connector and the 1
the "violet" port. The additional monitor MUST be attached otherwise windows will
not detect and enable the 2
work; they should affect the host console.
Start your PC. Windows will automatically detect the new AGP Video device as a
standard VGA-card. Please install first all drivers before installing "MagicTwin" of the
MAGIC INSTALL CD. Insert the CD, wait for the automatic start and run the
Installation of all other drivers beside the MagicTwin from the Magic Install CD. If the
CD does not run automatically, please click to Start-> Run-> CD-Drive->
SETUP.EXE.
After all other drivers have been installed, lastly install the MagicTwin as follow:
Click "MagicTwin" when the MAGIC INSTALL MENU appears. The Installation-routine will start...
Dual Port AGP VGA Card
st
nd
and 2
mouse to the Y-cable, which is also linked to the "green" PS/2
st
nd
and 2
keyboard to the other Y-cable, which is also connected to
nd
monitor. Make sure the additional keyboards and mice
48
Advertisement
Table of Contents
