Table of Contents
Advertisement
5. ATA100/RAID Mode Selector: J6 (Only for 866AS-R)
When J6 1-2 closed the IDE3 & IDE4 are setting in ATA100 Mode supports Ultra DMA
100MB/sec transfer rate.
When J6 2-3 closed the IDE3 & IDE4 are setting in RAID Mode supports RAID 0
(striping) to increase hard drive performance or RAID 1 (mirroring) to protect hard drive
data for more detail information please refer CD-PACK in X:\MANUAL\PROMISE.DOC
2-3 Install CPU
2-3-1 Glossary
Chipset (or core logic) - two or more integrated circuits which control the interfaces between
the system processor, RAM, I/O devises, and adapter cards.
Processor slot/socket - the slot or socket used to mount the system processor on the
motherboard.
Slot (AGP, PCI, ISA, RAM) - the slots used to mount adapter cards and system RAM.
AGP - Accelerated Graphics Port - a high speed interface for video cards; runs at 1X
(66MHz), 2X (133MHz), or 4X (266MHz).
PCI - Peripheral Component Interconnect - a high speed interface for video cards, sound
cards, network interface cards, and modems; runs at 33MHz.
ISA - Industry Standard Architecture - a relatively low speed interface primarily used for
sound cards and modems; runs at approx. 8MHz.
Serial Port - a low speed interface typically used for mouse and external modems.
1
3
JP1
1-2 closed
K/B Power ON Disable
(Default)
Keyboard Power On Setting
Note: If you only install hard drive in IDE3 and
IDE4 and the J6 setting 2-3 closed then this driver
must install IDE RAID 0 or IDE RAID 1 Mode by
Fast Build Utility, please press <Ctrl-F> to enter
setup Main Menu and choose "Auto Setup" to setup
your hard drive.
J6
1-2 closed
10
JP1
2-3 closed
K/B Power ON Enabled
J6
1
3
ATA100 Mode
2-3 closed
(Default)
ATA 100/RAID Mode Selector
1
3
1
3
RAID Mode
Advertisement
Table of Contents
