Operation Instructions - Haier HMC920BEBB User Manual

OPERatiOn inStRUCtiOnS

SIGNALS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEP: Oven does not accept the
entry, check and try again.
SEtting tHE ClOCk
1. Touch CLOCK pad.
2. Use the number pad to enter the
correct time.
3. Touch CLOCK pad again.
nOtE: This is a 12-hour clock. When the
oven is first plugged in or when power
resumes after a power interruption,
the display will show ENTER CLOCK
TIME. If you prefer to not have the clock
displayed, touch RESET.
SEtting tHE tiMER
The timer operates as a minute timer.
1. Press Timer pad.
2. Enter the amount of time you want to
count down.
3. Press the Start pad. When the time is
up, the timer will signal.
nOtE: The timer operates without
microwave energy.
SEtting tHE POWER lEVEl
The default power output setting is
100%. If you want to set a power level
other than 100%, touch POWER LEVEL,
and then use the number pad to enter
the power level.
nUMBER COOking
PaD POWER
10 100%
9 90%
8 80%
7 70%
6 60%
nUMBER COOking
PaD POWER
5 50%
4 40%
3 30%
2 20%
1 10%
Page 12 • Set UP & USe
SEtting a COOking PROgRaM
a. Single-stage cooking
1. Use the number pad to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
2. Set the Power Level if other than
100%.
3. Touch START/STOP to start cooking.
B. Multiple-stage cooking
Some foods or recipes require
different stages of cooking at different
temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in "Single-stage
Cooking". Do not touch START/STOP.
2. SET STAGE 2:
Touch TIME COOK 2 then enter
proper cooking time and (lower)
power level. Most Multiple-Stage
recipes use lower power for second
stage.
3. Touch START/STOP to start cooking.
nOtE: After stage 1 time has elapsed,
one beep sounds, signaling the
beginning of stage 2.
• After total time has elapsed, the
system will beep with END in the
display. The beeps will continue
to sound automatically every two
minutes until the door is opened or
any button is touched.
SPEED DEfROSt
1. Touch SPEED DEFROST.
2. Enter desired defrosting time with
the number pad.
3. Touch START/STOP.
nOtE: Remove meat from package and
place on microwave safe dish.