Operation Instructions - Haier MWM0701TB - 0.7cf 700W Touch Microwave User Manual

OPERATION INSTRUCTIONS

SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
When the microwave oven is plugged into an outlet, the oven will display "0:00."
(1) Press "0/CLOCK" and the LED will display 00:00. The hour number will blink.
(2) Press the number keys to enter the correct time. Time input should be 1:00-12:59. For
example, if the time is 10:12, press "1,0,1,2."
(3) Press "START/+30SEC." to confirm the time and finish setting the clock. The time will
be on the display.
(1) If time input is beyond 1:00-12:59, the setting is invalid. You cannot confirm
Note
and finish setting by pressing "START/+30SEC.."
(2) If you want to reset the clock, repeat steps 1 through 3. If you don't press
"START/+30SEC." after setting, the previously set time will be display after
one minute.
2. KITCHEN TIMER
(1) Press "9/KITCHEN TIMER." The LED will display 00:00. The first "0" will flash, and
":" and the other "0" will be lit.
(2) Press the number keys to enter the correct time. (The maximum cooking time is 99
minutes and 99 seconds.)
(3) Press "START/+30SEC." to confirm setting.
(4) When the set time is reached, the buzzer will ring 5 times and the oven will return to
the resting state. If the clock is set (12-hour system), the LED will display the
current time.
3. MICROWAVE COOK
Ten power levels are available.
Level 10
Power 100%
Display PL10
(1) Press "POWER" repeatedly to choose the microwave power you need. "PL10",
"PL9","PL8"...."PL1" will be displayed in order.
9 8 7
90% 80% 70%
PL9 PL8 PL7
6 5 4
60% 50% 40%
PL6 PL5 PL4
English
3 2 1
30% 20% 10%
PL3 PL2 PL1
12