RocketFish RF-ABTMSE User Manual page 8

Installing your mouse
To install your mouse:
1 Turn on your computer and make sure that your
Bluetooth device is set to search mode.
2 Slide your mouse's power switch to the ON position. The
switch is located on the bottom of your mouse.
3 Press and hold the pairing button on the bottom of your
mouse until the LED indicator flashes green.
4 Your computer automatically detects your mouse and
installs the appropriate driver.
If you are using a Mac, the mouse is fully functional. If you
are using a PC, you need to install the tilt wheel driver to
make your mouse fully functional.
8