Connecting The Receiver - Logitech 904286-0403 - Marble Mouse Trackball User Manual

1.

Connecting the Receiver

TrackMan ®
Enjoy all the great features of TrackMan Live! (according to the platform) in these popular
operating systems.
TrackMan Live! uses digital radio technology. Communication between TrackMan Live!
and your computer is achieved with great reliability using radio waves.
TrackMan Live! does not have a bulky cable that can get in the way, nor does it
use infrared technology, which often requires line-of-sight placement and usage.
Instead, TrackMan Live! emits radio frequencies as a means of communicating,
which are picked up by the receiver and passed on to your computer.
The receiver is connected to your computer via a single cable that plugs into
your computer's PS/2 port. A 9-pin serial port adapter is provided should you need
to connect this cable to your computer's serial port.
CAUTION: Before installing the receiver's cable, turn off your computer.
1. For a PS/2 mouse port installation only,
turn off the computer.
2. Connect the receiver to the
computer's PS/2 6-pin mouse port
or its 9-pin serial port using a 9-pin
adapter.
When using a 9-pin adapter, connect
the adapter to the computer port,
tighten the thumb screws, and connect
the data cable to the adapter. Be sure to line up the arrows on both the cable
and the adapter.
3. For a PS/2 mouse port installation only, turn on the computer.
Connecting the Receiver
Live! ™ works in Windows
Plugging or unplugging cables to your computer's PS/2 port can
damage the PS/2 port or your computer.
® 3.1x, Windows ® 95, Windows
PS/2 6-pin
mouse port
® 98, and Windows NT ® 4.0.
9-pin
serial port
Attaching
the 9-pin
adapter
1