Getting Started; Step 1: Unpack; Step 2: Prepare The Remote Control - JVC G200 - UX Micro System Instructions Manual

Step 1
:Unpack the package and
check the accessories.
Step 2
: Prepare the remote control.
Step 3
: Connect the AM/FM antennas
and speakers (see pages 4
and 5).
Finally plug the AC power cord.
Now you can operate the System.
3

Getting Started

Step
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• AM loop antenna (1)
• Remote control (1)
• Batteries (2)
If any item is missing, consult your dealer immediately.
Step
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
• If the range or effectiveness of the remote control
decreases, replace both batteries.
1
2
3
F M
C O A
X L
7 5 Ω
A M
L O O
P
A M
E X T
A N T
E N N
A
1
: Unpack
2
: Prepare the Remote Control
R03(UM-4)/AAA(24F)